DN100 PN16 Wafer Butterfly Valve with Worm Gear
Butterfly valves are quarter turn valves ideal for on/off operations as well as modulating flow. This valve is rated for 16 bar non-hazardous fluids and is operated by worm gear. Please note that the maximum pressure may deviate based on the medium type so carefully check the datasheet. The nominal diameter is 100 mm (4 inch) and is mounted to your system by an wafer type flange.
DN100 PN16 Butterfly Valve with Worm Gear Photo
|Size||DN100 (Butterfly Valve Sizes Available)|
|Body material||Ductile iron, Cast iron, WCB, SS 304 / SS 316, Duplex steel|
|Disc material||Ductile iron, Stainless steel, Duplex steel, Aluminum bronze|
|Seat material||EPDM, NBR, PTFE, FKM (Offering Resilient Replaceable Seat)|
|Working tempratur||-10C (-20C peak) / +80C (90C peak)|
|Application||Air, Boiler feedwater, Cargo oil, Condensate, Flammable hydraulic oil, Fuel oil, Gas, Lubricating oil, Non-flammable hydraulic fluid, Sea water, Water|
DN100 PN16 Butterfly Valve with Worm Gear Advantage
- The hand operation allows for easy operation and understanding.
- Relative low torque to switch position compared to ball valves.
- High Kv-value because fluid can flow in straight line.
- It has a small construction length in relation to the 100 mm (4 inch) diameter compared to a similar size ball valve.
- It can be used for a wide array of fluids and gases.
VALTECCN(www.valteccn.com) wafer butterfly valve suppliers and manufacturers provide you with butterfly valve with worm gear related pictures and drawings, overall dimensions, specifications and models, latest prices, product catalogues and other information, welcome to email ([email protected]) to consult and purchase! Provide reference value for your purchase of dn100 pn16 butterfly valve with worm gear products.
Any issue about the butterfly valve with worm Gear during the project process, please do not hesitate to contact us. We are a pleasure to help you resolve the problem.