Butterfly Valve Article
  1. Home
  2. Blog
  3. Butterfly Valve Article

DN100(4 Inch) CF8/CF8M Butterfly Valve with PTFE Seat Suppliers and Manufacturers

25 views Source: VALTEC China Valve Manufacture CO.,LTD

Stainless Steel Butterfly Valve

304 and 316 stain­less steel butterrfly valve, known as CF8 and CF8M respectively. The compositional makeup of these two alloys are similar: chromi­um and nickel contents. CF8M contains 2% to 3% molybdenum that CF8 does not have.

CF8M 316 Stainless Steel

The corrosion resistant alloy Type 316 is molybdenum steel possessing improved resistance to pitting for solutions containing chlorides and other halides. In addition it provides excellent elevated temperature, tensile, creep, stress and rupture strengths.

CF8 304 Stainless Steel

General purpose corrosion resistant alloy. Has low carbon content and is non-magnetic. May be susceptible to chloride stress corrosion cracking.

DN100(4 Inch) CF8/CF8M Butterfly Valve with PTFE Seat Image

DN100(4 Inch) CF8/CF8M Butterfly Valve with PTFE Seat
DN100(4 Inch) CF8/CF8M Butterfly Valve with PTFE Seat

CF8M stainless steel butterfly valve show better corrosion resistance. But CF8 stainless steel butterfly valve have a lower cost. The selection of these two alloys butterfly valve mainly depends on the working environment. If you are unfamiliar with them, VALTECCN VALVE can recommend a good alloy butterfly valve for your cast stainless steel product according to our rich butterfly valve experience.

Learn More: , , , ,


Manual butterfly valve why can be widely promoted and used

Titanium plate split body lug butterfly valve

Stainless Steel CF8, CF8M, CF3, CF3M Butterfly Valve Material Introduction

Wafer Butterfly Valve Performance Advantages

Aluminum Bronze Butterfly Valve Marine Seawater Valve

PTFE Seat Butterfly Valve Introduction


GGG50 Butterfly Valves are Exported to Turkey

Stainless steel wafer butterfly valve was export to Malaysia

Worm gear flanged butterfly valve for export to the UK

2000pcs GGG40 Butterfly Valves EPDM seat Exported to Malaysia

China DN600(24 Inch) Wafer Butterfly Valve PTFE Seat

EPDM Dovetail Type Seat Wafer Butterfly Valves for Export to Europe

Contact Information

For inquiries about valve products or pricelist, please leave your email to us and we will be in touch within 24 hours.
We would like to serve you in the best possible way.

Fill in the error, please re-fill and submit!

  • E-mail address entered is invalid.